Cart is empty
Gel polish #435 – pink-lilac holographic
High-quality medium-density gel polish has a dense, rich pigment. It provides neat, even coverage of the nail plate in one or two coats, does not bleed into the side grooves, and has no strong odor. Due to its fairly thick consistency, the gel polish can be used not only as a standalone color but also for design. It has optimal curing speed in UV/LED lamps.
Advantages of ADORE professional gel polish:
- safe 9-free formula
- current palette of carefully selected shades
- 3-stage product testing
Application technology:
0. Prepare the nail plate for gel polish application: perform a manicure and shape the free edge of the nail as desired. If using a remover, remove its residue with a damp wipe
1. Degreasing:degrease the nail plate mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe)
2. Dehydration:apply NAIL FRESHER to the entire nail and let it air dry until a whitish tint appears on the nail plate surface
3. Bonding:apply acid-free primer ULTRABOND to the entire nail with a semi-dry brush, leaving 1 mm from the cuticle and side walls. Let it air dry for 15 seconds
4. Base coat:apply base coat in an even layer. Cure in a UV lamp for 2–3 minutes, in an LED lamp for 60–90 seconds. For leveling the architecture with base, we recommend using only low-acid bases over a cured underlayer
1. Degreasing:degrease the nail plate mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe)
2. Dehydration:apply NAIL FRESHER to the entire nail and let it air dry until a whitish tint appears on the nail plate surface
3. Bonding:apply acid-free primer ULTRABOND to the entire nail with a semi-dry brush, leaving 1 mm from the cuticle and side walls. Let it air dry for 15 seconds
4. Base coat:apply base coat in an even layer. Cure in a UV lamp for 2–3 minutes, in an LED lamp for 60–90 seconds. For leveling the architecture with base, we recommend using only low-acid bases over a cured underlayer
5. Color:apply GEL POLISH in 1–2 thin coats, avoiding strong pressure on the brush. Cure each coat in a UV lamp for 2 minutes, in an LED lamp for 60 seconds
6. Finish coat:seal the coating with a top coat. Cure in a UV lamp for 2–3 minutes, in an LED lamp for 60 seconds or more. Allow the coating to cool completely
For leveling the architecture with top, we recommend using top coats of medium-thick and thick consistency
! PRO tip:cover light and bright gel polishes with a top coat with UV filters to preserve shade intensity, and dark and red colors with a top coat without UV filters to prevent shade distortion
! Strict adherence to gel polish application technology is the key to long-lasting manicure wear without chips, cracks, or peeling.