Cart is empty
Gel polish №403 – sky in water
High-quality gel polish of medium density has a dense rich pigment. It provides neat, even coverage of the nail plate in one or two coats, does not flood into the cuticle area, and has no strong odor.
Thanks to its quite thick consistency, the gel polish can be used not only as a standalone color but also for nail art. It has an optimal curing speed in UV / LED lamps.
ADORE professional gel polish advantages:
- safe 9-free formula
- current palette of carefully selected shades
- 3-stage product testing
Application technique:
0. Prepare the nail plate for gel polish application: perform a manicure, give the desired shape to the free edge of the nail. If using a remover, remove its residue with a damp wipe.
1. Degreasing: degrease the nail plate mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe).
2. Dehydration: apply NAIL FRESHER to the entire nail and allow it to air-dry until a whitish tint appears on the surface of the nail plate.
3. Bonding: with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving a 1 mm gap from the cuticle and side walls. Allow to air-dry for 15 seconds.
4. Base coat: apply base coat in an even layer. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. For leveling the nail architecture with base, we recommend using only low-acid bases over a layer of cured substrate.
1. Degreasing: degrease the nail plate mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe).
2. Dehydration: apply NAIL FRESHER to the entire nail and allow it to air-dry until a whitish tint appears on the surface of the nail plate.
3. Bonding: with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving a 1 mm gap from the cuticle and side walls. Allow to air-dry for 15 seconds.
4. Base coat: apply base coat in an even layer. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. For leveling the nail architecture with base, we recommend using only low-acid bases over a layer of cured substrate.
5. Color: apply GEL POLISH in 1-2 thin coats, avoiding strong pressure on the brush. Cure each coat in a UV lamp for 2 minutes, in an LED lamp for 60 seconds.
6. Top coat: seal the coating with top coat. Cure in a UV lamp for 2-3 minutes, in an LED lamp – from 60 seconds. Allow the coating to cool completely.
For leveling the architecture with top coat, we recommend using top coats of medium-thick and thick consistency.
! PRO tip: to maintain color intensity, cover light and bright gel polishes with a UV-filter top coat, and dark and red colors with a top coat without UV filters to prevent color distortion.
! Strict adherence to the gel polish application technique is the key to long-lasting manicure wear without chips, cracks, or peeling.