Cart is empty
Gel polish No. 317 – soft pink with gold glitter
High-quality gel polish of medium density has a dense rich pigment. Provides neat, even coverage of the nail plate in one or two layers, does not seep into lateral grooves, has no strong odor.
Thanks to its quite thick consistency, you can use the gel polish not only as an independent color but also for nail art. It has an optimal polymerization speed in UV/LED lamps.
ADORE gel polish advantages professional:
- safe 9-free formula
- relevant palette of carefully selected shades
- 3-stage product testing
Application technology:
0. Prepare the nail plate for gel polish application: perform a manicure, shape the free edge of the nail. If using remover, remove its residues with a wet wipe.
1 Degreasing:mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration:apply NAIL FRESHER over the entire nail, let it air dry until a whitish tint appears on the nail plate surface
3. Bonding:apply acid-free primer ULTRABOND to the entire nail with a semi-dry brush, leaving 1mm from the cuticle and side walls. Allow to air dry for 15 seconds
4. Base coat:apply a base coat in an even layer. Polymerize in UV lamp 2-3 minutes, in LED lamp 60-90 seconds. To level the architecture with the base, we recommend using only low-acid bases on a layer of dry base coat
1 Degreasing:mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration:apply NAIL FRESHER over the entire nail, let it air dry until a whitish tint appears on the nail plate surface
3. Bonding:apply acid-free primer ULTRABOND to the entire nail with a semi-dry brush, leaving 1mm from the cuticle and side walls. Allow to air dry for 15 seconds
4. Base coat:apply a base coat in an even layer. Polymerize in UV lamp 2-3 minutes, in LED lamp 60-90 seconds. To level the architecture with the base, we recommend using only low-acid bases on a layer of dry base coat
5. Color:apply GEL POLISH in 1-2 thin layers, avoiding strong pressure on the brush. Polymerize each layer in UV lamp 2 minutes, in LED lamp 60 seconds
6. Finish coating:secure the coating with a top. Polymerize in UV lamp 2-3 minutes, in LED lamp – from 60 seconds. Let the coating cool completely
To level the architecture with the top, we recommend using medium-thick and thick consistency tops
! PRO tip: cover light and bright gel polishes with a top with UV filters to preserve color intensity, and dark and red colors with a top without UV filters to prevent color distortion
! Strict adherence to gel polish application technology ensures long-lasting manicure without chips, cracks, or peeling.