Cart is empty
Gel Polish #185 – juicy raspberry
High-quality gel polish of medium density has a dense rich pigment. Provides neat, even coverage of the nail plate in one or two layers, does not flow into the sinuses, and has no strong odor.
Thanks to its fairly thick consistency, the gel polish can be used not only as an independent color but also for nail art. It has optimal polymerization speed in UV/LED lamps.
Advantages of ADORE gel polish professional:
- safe 9-free formula
- relevant palette of carefully selected shades
- 3-stage product testing
Application technique:
0. Prepare the nail plate for gel polish application: perform a manicure, give the desired shape to the free edge. If using remover, remove its residue with a damp cloth
1 Degreasing:mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free cloth) degrease the nail plate
2. Dehydration:apply NAIL FRESHER to the entire nail, let it air dry until a whitish tint appears on the surface of the nail plate
3. Bonding:with a half-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving 1 mm from the cuticle and side walls. Let it air dry for 15 seconds
4. Base layer:apply base coat in an even layer. Polymerize in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. For leveling the architecture with base, we recommend using only low-acidity bases on a dried underlayer
1 Degreasing:mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free cloth) degrease the nail plate
2. Dehydration:apply NAIL FRESHER to the entire nail, let it air dry until a whitish tint appears on the surface of the nail plate
3. Bonding:with a half-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving 1 mm from the cuticle and side walls. Let it air dry for 15 seconds
4. Base layer:apply base coat in an even layer. Polymerize in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. For leveling the architecture with base, we recommend using only low-acidity bases on a dried underlayer
5. Color:apply GEL POLISH in 1-2 thin layers, avoiding strong pressure on the brush. Polymerize each layer in a UV lamp for 2 minutes, in an LED lamp for 60 seconds
6. Finish coat:secure the coating with top. Polymerize in a UV lamp for 2-3 minutes, in an LED lamp for at least 60 seconds. Let the coating cool completely
For leveling the architecture with top, we recommend using medium-thick and thick tops
! PRO tip: light and bright gel polishes, to preserve the intensity of shades, cover with top with UV filters, and dark and red colors, to prevent shade distortion, with top without UV filters
! Strict adherence to the gel polish application technique is the key to long-lasting wear without chips, cracks, or detachments.