Cart is empty
Gel polish №147 – vanilla-beige
High-quality gel polish of medium density with a dense, rich pigment. Provides neat, even coverage of the nail plate in one or two layers, does not seep into the grooves, and has no strong odor.
Thanks to its fairly thick consistency, the gel polish can be used not only as a standalone color but also for designs. It has an optimal curing speed in UV/LED lamps.
Advantages of ADORE gel polish professional:
- Safe 9-free formula
- Up-to-date palette of carefully selected shades
- 3-stage product testing
Application technology:
0. Prepare the nail plate for gel polish application: perform a manicure, give the free edge the desired shape. If using a remover, remove its residue with a damp wipe.
1. Degreasing:mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate.
2. Dehydration:apply NAIL FRESHER to the entire nail, let it air dry until a whitish tint appears on the nail plate surface.
3. Bonding:apply an acid-free primer ULTRABOND to the entire nail with a semi-dry brush, leaving 1mm from the cuticle and side walls. Let it air dry for 15 seconds.
4. Base layer:apply a base coat in an even layer. Polymerize in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. To level the architecture with the base, we recommend using only low-acid bases on a layer of dried underbase.
1. Degreasing:mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate.
2. Dehydration:apply NAIL FRESHER to the entire nail, let it air dry until a whitish tint appears on the nail plate surface.
3. Bonding:apply an acid-free primer ULTRABOND to the entire nail with a semi-dry brush, leaving 1mm from the cuticle and side walls. Let it air dry for 15 seconds.
4. Base layer:apply a base coat in an even layer. Polymerize in a UV lamp for 2-3 minutes, in an LED lamp for 60-90 seconds. To level the architecture with the base, we recommend using only low-acid bases on a layer of dried underbase.
5. Color:apply GEL POLISH in 1-2 thin layers, avoiding strong pressure on the brush. Polymerize each layer in a UV lamp for 2 minutes, in an LED lamp for 60 seconds.
6. Finish coat:seal the coating with a top coat. Polymerize in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds. Let the coating cool completely.
To level the architecture with the top coat, we recommend using medium-thick and thick consistency top coats.
! PRO tip: cover light and bright gel polishes with a top coat with UV filters to preserve shade intensity, and dark and red colors with a top coat without UV filters to avoid shade distortion.
! Strict adherence to gel polish application technology is the key to long-lasting manicure without chips, cracks, and peeling.