ADORE. Funky Gel Tips, Square Long, 240 pcs.

Disposable gel-based tips for speed nail extension - elongated square

Gel tips are a true revolution in the world of nail modeling. This unique product can replace forms for extension, gel or acrylic gel, significantly simplifying and reducing the extension process to 20-30 minutes!

FUNKY GEL TIPS - thin but strong and flexible tips based on modeling gel and plastic. They withstand everyday loads well, absorb shock well, and externally are almost indistinguishable from natural nails. Made using a soak-off formula, they are suitable for removal either by soaking with GEL REMOVER or with a drill. The tips are easy to file and change length.
They are most suitable for cases where a natural length is needed.

FUNKY GEL TIPS contain 10 plates from size 0 to 11 in a box, allowing you to choose the best shape and size for each nail.

Tip sizes: largest 13*34mm, smallest 6.5*22mm.

Advantages:

High extension speed
· extension of one nail takes 1-2 minutes
· extended tips can be immediately covered with color
Low cost
· cost of one extension will be no more than $1
Ease of work
· do not require modeling skills
· minimum additional materials
· do not require architecture correction
Minimal filing
· perfectly smooth structure
· minimal thickness in the cuticle area for tight fit to the nail plate
· good architecture, similar to a natural nail
Lightness
· nails extended on gel tips are weightless

Disadvantages:
· require shape adjustment or additional work with the natural nail for some types and sizes of nails (arched, trampoline)

Usage Technology:

1. Degrease the nail plate mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe)
2. Apply NAIL FRESHER dehydrator to the entire nail, let it air dry. If the nails have not become whitish, repeat dehydration
3. Apply acid-free primer ULTRABOND* with a semi-dry brush to the free edge of the nail plate
* if using high-adhesion MULTI BASE, this step can be skipped
4. Apply flexible base coat MULTI BASE or glue gel FUNKY TIPS GLUE GEL to the entire natural nail. Polymerize in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds
5. Select the necessary size and shape of FUNKY GEL TIPS for each nail
6. Apply MULTI BASE/ FUNKY TIPS GLUE GEL on the inside of the tip to the contact area of the tip with the natural nail in a thin layer
7. Press the tip to the nail plate, gradually push toward the cuticle. Leave a 1-2mm gap, send the nail into the lamp for a few seconds to set the glue. You can use a mini lamp or a flashlight lamp for easier fixation
8. Fully cure the nails in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds without pressing
9. Remove the step in the cuticle area with a drill or file, secure the cut with base. Polymerize the leveling layer in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds
10. Shape the nail with a file of abrasive no more than 180 grit
11. Apply color coating and seal it with top coat, or use colored top coat FUNKY COLOR TOP. We recommend also coating the inside of the free edge of the tip with top coat to avoid clouding during wear.

Brand: ADORE