ADORE. Color Base, №06, White, 8 ml. Color base

Color base 8ml No.06 - white

Universal white base coat has dense pigment and retains nail flexibility after polymerization. Requires a thin adhesive base underlay to protect the natural nail from pigments and for longer curing in the lamp. Applied in one layer. Does not weigh down the nail. Not suitable for leveling.

COLOR BASE white is used as a base coat for complex gel polish shades or instead of gel polish, as a base for rubs and designs.

Recommended for all nail types.

Advantages of the base:

- reduces the master's working time

- excellent self-leveling

- does not add extra volume

- suitable for pedicure

Consistency: medium.
Polymerization speed: below average.
After polymerization: flexible.
Pigmentation: high.
Acidity: medium.

Application technology:

1. Prepare the nail plate: perform a manicure, shape the free edge of the nail as desired.
2. Degreasing: mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate
3. Dehydration: apply NAIL FRESHER to the entire nail, let air-dry until a whitish tint appears on the nail plate surface
4. Bonding*: with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving a 1mm gap from the cuticle and side walls. Let air-dry for 15 seconds.

* when using MULTI BASE, this step can be skipped

4. Base layer: apply a primer layer of cushioning base coat MULTI/RUBBER BASE in a thin/rubbing layer. Cure the base coat in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds
5. Color: apply COLOR BASE in a thin layer, add a small drop for tone leveling. Cure the base in a UV lamp for 3-5 minutes, in an LED lamp for 60-90 seconds.
6. Finish coat: seal the coating with a top with UV filter RUBBER TOP/ STOP SCRATCH TOP. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 1 minute. When using a top with a sticky layer RUBBER TOP - let the coating cool, then remove the tackiness using PREP&FINISH and a lint-free wipe.