ADORE. Cover Gel, 30 g, #02, Souffle. Semi-transparent builder gel, milky pink

Semi-transparent gel in a jar with a vacuum pump Cover Gel <\/span><\/span><\/p>

Cover Gel<\/strong> is a camouflage gel of classic medium consistency for strengthening and salon nail extensions up to medium length.<\/span><\/p>

Used for:<\/strong><\/p>

• strengthening short nails with a sidewall technique<\/span><\/li>
• correcting the architecture with the 'no filing' technique<\/span><\/li>
• extending salon forms of medium length<\/span><\/li> <\/ul>

  The gel has a consistency close to a base and controlled self-leveling, suitable for fast work. Semi-transparent natural shades softly camouflage the nail plate, creating a perfect base for French manicures.<\/span> <\/span><\/p>

  Convenient to use and store thanks to the vacuum dispensing system: one press = one drop. The drop volume is adjusted by the force of pressing the pump.<\/span><\/p>

  Advantages of Cover Gel:<\/strong><\/p>

  ✔ Medium thickness of the gel allows working quickly in a conveyor method
  ✔ Optimal viscosity — self-levels smoothly, leaving a minimum for further refinement
  ✔ Semi-transparent coating - creates an exquisite Clean girl effect<\/p> Hardness: 8\/10<\/span>
  Density: 5\/10<\/span>
  Viscosity: 4\/10<\/span>
  Plasticity: 3\/10<\/span>
  Pigmentation: 4\/10<\/span>

  How to apply the gel:<\/strong><\/p> 0. Prepare the nail plate:<\/strong> remove previous coating, perform a manicure, shape the free edge of the nail as desired.
  1. Degreasing:<\/strong> <\/span>mechanically (with a nail file 180\/240) and chemically (using Prep&Finish and a lint-free wipe) degrease the nail plate.
  2. Dehydration: <\/strong>apply Nail Fresher to the entire nail, let air dry until a whitish tint appears on the nail plate surface.
  3. Bonding:<\/strong> <\/span>when using the adhesive base PRO Base-Bond, skip this step.
  4. Base coat: <\/strong>apply an even layer of PRO Base-Bond base coat, carefully treating the sidewalls and free edge. Cure the base coat in an LED lamp for 60 sec. For easier subsequent gel application, remove the tacky layer from the base.
  5.1. Strengthening:<\/strong>
  - with a gel brush, apply a thin layer of gel over the entire nail plate, staying 1.5 mm away from the cuticle<\/span>
  - on top of the uncured gel, apply a second leveling layer, following the basic principles of modeling with liquid gels<\/span>
  - cure in an LED lamp for 90 sec on low power mode 24 W<\/span>
  - remove the residual tackiness with Prep&Finish and a lint-free wipe<\/span>
  - with a nail file 150\/180 grit, gradually file the shape<\/span>
  - file out the natural nail from the inside by at least 1 mm with a drill bit or nail file.<\/span>
  5.2. Extensions:<\/strong>
  - prepare\/apply forms one by one for each finger<\/span>
  - staying 1.5 mm away from the cuticle area, lay a thin substrate of the desired length and shape directly onto the lower or upper form, then model the nail architecture with gel over it<\/span>
  - cure in an LED lamp for 90 sec on low power mode 24W<\/span>
  - remove the residual tackiness with PREP&FINISH and a lint-free wipe<\/span>
  - with a nail file 150\/180, gradually file the shape<\/span>
  

  Note! Before use, remove the transparent protective cap from the pump!<\/strong><\/span><\/em><\/p>

  Brand: ADORE 
  Volume: 30 g<\/p>