LUNAmoon. Mousse Gel #06, 30 ml, gel espeso para extensión, con shimmer

Mousse lab collection by Lora Sheiderova
Mousse gel 01-06

Mousse gel — modeling gel with a thick creamy texture, created in the collaboration Lora Sheiderova × LUNAmoon. The material stretches plastically under the brush while holding the given shape well and does not run during work. Thanks to minimal thixotropy, the gel is convenient to lay into upper forms: it stays in place and provides enough time for precise modeling without rushing. The dense, controlled consistency allows you to work with several forms at once without worrying that the material will flood or lose the desired architecture. Delicate glitter adds a special effect to the coating, creating a soft radiance on the light, reminiscent of a light rubbing effect.

Features:

• Has a very thick and viscous consistency, thanks to which the material does not spread and allows you to calmly work with the shape.
• Practically does not self-level, so the gel can be precisely laid with a brush and you can control every stage of modeling.
• Has high strength after polymerization and preserves the built nail architecture well.
• In its properties, the material is close to hard, so during modeling it is important to control the thickness of the coating, especially in the cuticle area.
• Has moderate flexibility at a 1 mm thickness, thanks to which it remains maximally stable and maintains a good arch.
• Suitable for nail extensions and modeling.
• Obligatory requires a Rubber Base substructure.
• UV/LED lamp power 36-48W.
• Permissible coating thickness 0.5 mm at the free edge/1 mm at the apex.
• Full curing 120 seconds.

Application method:

STRENGTHENING

1. Removal.
2. We do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. With a 180 grit file, file without strong pressure on top of the nail, slightly lifting the nail plate flakes, or use a 100 grit buffer.
4. Perform manicure.
5. If working with removers, wash hands with soap after working with them.
6. Degrease the nail with Nail Prep LUNAmoon. Do two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, wrap a wipe around it, and wipe everything in the cuticle area and sidewalls.
7. Primer is optional, but if the base coat has sufficient acidity, it is not needed.
8. The Rubber Base LUNAmoon substructure is best applied with a flat gel brush. Movements should be rubbing-in. Paint all nail sidewalls and cure in the lamp for 60 seconds.
9. Wipe off the dispersion layer.
10. Level the nail plate with gel, leaving a 0.5–1 mm gap from the cuticle. Do not create excessive thickness in the cuticle area: the material is close to hard, so on the soft and flexible part of the nail plate, excess material may cause peeling. Cure in the lamp for 60 seconds.
11. Lima la forma despues de haber nivelado. Esto es necesario para que se forme un grosor en el borde de la uña que mantenga el borde libre.
12. Si la uña era fina, puede rizarse, por lo que siempre limamos 1 mm de la uña natural desde el interior. De esta manera no habrá desprendimientos del material. Si el material es duro y la uña es muy blanda, la propia uña comenzara a separarse del material duro desde el borde libre.
13. Despues de limar, retire el pegajoso y aplique Gel Polish.
14. Aplique Top Coat. Cure durante 120 segundos. Despues del curado, no limpie con nada, ya que podria perder el brillo.

EXTENSION CLASICA

1. Remocion.
2. Acorte la longitud de la uña a 1 mm y haga una forma redonda.
3. Con una lima de 220 grit lime sin presion fuerte sobre la uña desde arriba, levantando las escamas de la placa ungueal, o use un buffer de 100 grit.
4. Haga la manicura.
5. Si trabaja con removedores, despues de usarlos, lavese las manos con jabon.
6. Desengrase la uña con Nail Prep LUNAmoon. Haga dos pasadas. Use 4 toallitas (1 toallita por 5 dedos). Primera pasada: limpie la superficie de la uña. Segunda pasada: tome un palito de naranjo, envuelva la toallita en el y limpie toda la zona de la cuticula y los senos.
7. Use el primer LUNAmoon.
8. La capa base de Rubber Base LUNAmoon se aplica mejor con un pincel plano para gel. Los movimientos deben ser de frotacion. Delinee todos los senos de la uña y cure en la lampara durante 60 segundos.
9. Retire el pegajoso.
10. Coloque la forma para la extension del borde libre de la uña.
11. Extienda la forma de la uña artificial con gel transparente. Cure durante 30 segundos.
12. Lime el borde libre y de a la uña la forma deseada.
13. Limpie el pegajoso y el exceso de polvo.
14. Pase nuevamente Rubber Base LUNAmoon por las areas donde uso la lima. Cure durante 30 segundos.
15. Realice el modelado con gel, controlando el grosor del material y sin sobrecargar la zona de la cuticula. Haga una pequena separacion de la cuticula. Coloque en la lampara y presione el arco aproximadamente en el segundo 20 de polimerizacion, ya que el gel contiene brillos. Despues de presionar, termine de curar el material en la lampara.
16. Termine de curar en la lampara durante 120 segundos.
17. Retire el pegajoso antes de cubrir con Gel Polish.
18. Aplique Top Coat. Cure durante 120 segundos. Despues del curado, no limpie con nada, ya que podria perder el brillo.

COMPOSICION: Acrylates Copolymer, IBOA, Silica, TMO, Mica. 
May contain: CI 77499, CI 77891, CI 14700, CI 47000, CI 42090.

Product shelf life: 24 months. Store no longer than 18 months after opening.
TPO FREE