You Are Cute. Bottle Gel #15, 5 ml, liquid gel

LIQUID BUILDER GEL BOTTEL GEL — is an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. This gel can completely replace a base.

Features:

• Polymerization wavelength — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Acceptable coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Full polymerization is achieved in 120 seconds.
• Suitable only for nail strengthening and extending.
• Has good cushioning.
• When strengthening with this gel, it is necessary to file the natural nail.
• Requires a Rubber Base underlay.
• It can be additionally heated to make the gel more liquid.

Application method:

STRENGTHENING:

1. Removal.
2. We do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. With a 220 grit file, we file the nail from above without strong pressure, lifting the scales of the nail plate, or we use a 100 grit buffer.
4. We do a manicure.
5. If we work with removers, after working with them we wash our hands with soap.
6. Degrease the nail with Nail Prep. We do two approaches. We use 4 wipes for this (1 wipe for 5 fingers). First approach: wipe the surface of the nail. Second approach: take an orange stick, put a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. We use primer optionally, but if the base for the underlay has sufficient acidity, it is not needed.
8. The Rubber Base underlay is best applied with a flat gel brush. Movements should be rubbing. We draw all the sidewalls of the nail and dry in a lamp for 60 seconds.
9. We wipe off the stickiness.
10. Level. If leveling with gel, step back from the cuticle 0.5–1 mm. Dry in a lamp for 60 seconds.
11. We file the shape after leveling. This is necessary so that a thickness forms at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so we always file out 1 mm of the natural nail from inside. In this case, there will be no material detachments. If the material is hard and the nail is very soft, the nail itself will start separating from the hard material from the free edge.
13. After filing, wipe off the stickiness and apply gel polish.
14. Apply top. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 5 ml

Brand: You Are Cute

Country: Ukraine