You Are Cute. Bottle Gel #20, 5 ml, liquid builder gel with white flowers

BOTTEL GEL LIQUID BUILDER GEL — an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. Such a gel can completely replace a base.

Features:

• Wavelength for polymerization — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Allowable coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Full polymerization occurs in 120 seconds.
• Suitable only for nail strengthening and extension.
• Has good cushioning.
• When strengthening with this gel, the natural nail must be filed.
• Requires a Rubber Base underlay.
• It can be additionally heated to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape, or leave 2 mm in length that will be removed after leveling.
3. File with a 220 grit nail file without strong pressure on top of the nail, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, wrap a wipe around it and clean everything in the cuticle area and sidewalls.
7. A primer is optional, but if the base for the underlay has sufficient acidity, it is not needed.
8. The Rubber Base underlay is best applied with a flat gel brush. Movements should be rubbing. Paint all the nail sidewalls and cure in the lamp for 60 seconds.
9. Wipe off the tacky layer.
10. Level. If leveling with the builder gel, make an indentation from the cuticle of 0.5–1 mm. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create a thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In that case, there will be no lifting of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material at the free edge.
13. After filing, wipe off the tacky layer and apply gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 5 ml

Brand: You Are Cute

Country: Ukraine