HEYLOVE. Frame builder Gel, O2 (Oxygen), 30 ml, universal builder gel, sky blue ("oxygen")

FRAME gel - universal builder gel for extensions in 13 shades

Packaged in a jar with a pump for dispensing the gel.

O2 (oxygen formula) - sky blue.

Video (material overview and packaging instructions) at link: https://www.instagram.com/reel/DDjuzN5tvVi/?igsh=YXAwcGZ1MjFmaTJl

Features:

• for modeling, correction, strengthening, extension without filing;
• medium consistency, closer to liquid;
• self-leveling;
• in a thin layer - elastic, in a thick layer holds the arch and does not deform;
• creates a durable coating, resistant to chips;

How to use:

1. Sand the nail plate with a 180 grit file or a 100 grit buffer.
2. Wipe with a degreaser to remove dust, especially under the cuticle and in the side sinuses.
3. Apply dehydrator and wait 30 seconds for it to evaporate moisture.
4. Apply a primer layer of Rubber base with rubbing motions and add a little more base to create a smooth surface. Cure for 30 seconds.
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel in an architectural layer or place it in an upper form or on a lower form (depending on the technique).
7. Cure each nail for 30 seconds, then at the end place both hands again for 1-2 minutes.
8. Remove the sticky layer from Frame gel and perform surface filing if necessary.
9. Apply top coat No Sticky or Dark Story and cure for 1-2 minutes.

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone, Pigments. May
Contain: Cl 77499, Cl 77891, CI 15850, Cl 45380, Cl 47005, Cl 15510

Attention! To avoid unwanted curing of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Also, please note that even in cloudy weather, clouds transmit a large amount of UV radiation, which is sufficient for the material to start curing. When painting tips, we recommend keeping the working side of the UV lamp turned away from the master. If you hold the lamp with the light facing the master, unwanted curing of the material on brushes and necks of open bottles may occur.

Note: all documents are in the attached files!