You Are Cute. Bottle Gel #23, 5 ml, liquid gel with white flowers

BOTTEL GEL Liquid Builder Gel — an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. Such a gel can completely replace the base.

Features:

• Polymerization wavelength — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Allowable coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, medium consistency.
• Has medium pigmentation, covers the free edge.
• Full polymerization takes 120 seconds.
• Suitable only for nail strengthening and extension.
• Has good shock absorption.
• When strengthening with this builder gel, you need to file out the natural nail.
• Requires a Rubber Base underlay.
• It can be additionally heated to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape, or leave 2 mm in length, which will be removed after leveling.
3. Using a nail file 220 grit, file the top of the nail without strong pressure, lifting the scales of the nail plate, or use a buffer 100 grit.
4. Do a manicure.
5. If working with removers, wash hands with soap after working with them.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange wood stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Primer is optional, but if the base for the underlay has sufficient acidity, it is not needed.
8. The underlay with Rubber Base is best applied with a flat gel brush. Movements should be rubbing. Paint all the sidewalls of the nail and cure in the lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Level. If leveling with builder gel, leave a 0.5–1 mm gap from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create a thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so we must file out 1 mm of the natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will start to separate from the hard material from the free edge.
13. After filing, wipe off the sticky layer and apply gel polish.
14. Apply top. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 5 ml

Brand: You Are Cute

Country: Ukraine