You Are Cute. Bottle Gel #21, 5 ml, liquid gel with white flowers

LIQUID GEL BOTTEL GEL — an innovative material for strengthening, leveling and nail extension. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. This gel can completely replace a base.

Features:

• Wavelength for polymerization — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Permissible coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, has a medium consistency.
• Has medium pigmentation, covers the free edge.
• Full polymerization takes 120 seconds.
• Suitable only for nail strengthening and extension.
• Has good shock absorption.
• When strengthening with this gel, it is necessary to file the natural nail.
• Requires a base of Rubber Base.
• It can be additionally heated to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. We do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. With a 220 grit nail file, file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, after working with them, wash your hands with soap.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes for this (1 wipe for 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, put a wipe on it and wipe everything in the cuticle area and sidewalls.
7. Primer is used optionally, but if the base for the underlay has sufficient acidity, it is not needed.
8. The underlay of Rubber Base is best applied with a flat gel brush. Movements should be rubbing. Paint all nail sidewalls and cure in a lamp for 60 seconds.
9. Wipe off the inhibition layer.
10. We level. If leveling with gel, make an indent of 0.5–1 mm from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is needed so that thickness is formed at the nail edge, which will hold the free edge.
12. If the nail was thin, it can curl, so be sure to file out 1 mm of natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will start to separate from the hard material from the free edge.
13. After filing, wipe off the inhibition layer and apply gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe anything, because the shine may be lost.

TPO FREE

Volume: 5 ml

Brand: You Are Cute

Country: Ukraine