ADORE. Art Gel "Funky Gum", 15 ml. Gel for 3D designs in a tube, transparent

Gum gel 15 ml in a tube - transparent

Funky Gum - gum gel for 3D designs with a sticky layer.

Used for 3D designs and sculpting 3D elements of any size and shape.

The gum gel remains flexible after polymerization, which minimizes trauma during wearing of large volume designs.

We do not recommend applying Funky Gum to the entire nail surface.

Physical and chemical properties:

• consistency - thick
• polymerization speed - low
• after polymerization – flexible
• PH - 6
  
  

Application technology:

0-4 Prepare the nail plate in the standard way: manicure, degreasing, dehydration, bonding. Apply base coat and color if needed.

5. Design:

5.1. Squeeze out a small amount of gum gel and create a 3D element of the desired shape. To lay out, periodically wet the tool (or fingers) in the alcohol-containing liquid PREP&FINISH.
5.2. Place the decorative element on the sticky layer of the coating. Polymerize in UV/LED lamp for 120/60 seconds.
5.3. Remove the sticky layer using PREP&FINISH and a lint-free wipe.

6. Top: seal the finished design with top. For hard-to-reach places, additionally use a liner. Polymerize in UV lamp for 2-3 minutes, in LED lamp - 1 minute.

Removal:

To remove designs made with Funky Gum, we recommend removing the main volume using nippers, and remove the residue with a drill or by soaking with Gel Remover.

PRO tip:
- for ease of use, we recommend creating 3D elements with bare hands (without gloves)
- to increase design variability, you can mix dry pigments, glitter and other dry decor into the gum gel

Manufacturer: ADORE

Volume: 15 ml