F.O.X. Builder Gel, 15 ml, Cover Pink. Three-phase gel for nail modeling

Builder Gel Cover is a three-phase gel for nail modeling, with a medium consistency. It self-levels perfectly, does not run, does not cause burning, easy to use even for beginners.

Application technique:

Standard nail plate preparation
1. Apply degreasing agent F.O.X Nail Prep onto the buffed nail surface;
2. Apply F.O.X Ultrabond — acid-free primer for additional adhesion;
3. Apply a layer of elastic base (F.O.X Base Power, F.O.X Base Rubber or F.O.X Air Base) with rubbing motions and cure in a UV lamp 36W for 2 min., LED/UV lamp 36/48W for 60 sec.

For lower forms:
4. Place the modeling forms and form a thin substrate with the gel. Cure in a UV lamp 36W for 1 min., LED/UV lamp 36/48W for 30 seconds.
5. Remove the forms and build the desired nail architecture with the gel. Cure in a UV lamp 36W for 2-3 min., LED/UV lamp 36/48W for 2-4 min., depending on the thickness of the applied layer.
6. Remove the sticky layer and file/shape. The nail is ready for gel polish or top coat from F.O.X.

Removed by filing.

Brand: F.O.X
Volume: 15 ml