HEYLOVE. Tint base "CLEAR pH 6.7", 15 ml, transparent low-acid base

Transparent self-leveling base with low acid content. Suitable for creating a base layer and leveling. Certified in the EU.

Video link: https://www.instagram.com/reel/Cqc9i2Yovtq/?igsh=MTE1YmVnaTFyZ2g1dg==

Consistency: medium

Hardness/Elasticity: elastic

Acidity: low-acid

DETAILED DESCRIPTION:

The low-acid base 'Clear pH 6.7' is an opportunity for the master to show care for the client.

Who do we recommend the 'Clear pH 6.7' base for?

- For clients with thin nail plates that are at risk of burns during material polymerization.
The composition of our base minimizes heat generation.

- For clients who are at risk of reactions to acidic rubber bases.
Low acid content reduces this likelihood.

- For clients who care about the health of their nails and want to switch to a safer material.

So the main idea of this base is safe formula and care for the client.

FEATURES:

- The base is designed for 3 weeks of wear, after which there is a risk of peeling.

- The master must carefully follow the application recommendations.

To ensure reliable adhesion of the material to the nail surface, the master must prepare the plate as for extension:

- lift the scales not with a buffer, but with a nail file 180-240 grit.

- thoroughly remove dust from under the cuticle and from the entire nail

- degrease and dry the nail surface with a dehydrator
- apply ultrabond
- using a semi-dry brush with rubbing movements, apply the first thin layer and immediately after that - a drop for leveling.

The base can also be combined with Rubber Base: first a thin primer layer of Rubber base, after polymerization apply a leveling layer of 'pH 6.7'.
This option provides safe leveling (without generating a large amount of heat) and at the same time strong adhesion to the nail surface.

Tint Base 'Clear pH 6.7' has successfully passed inspection and has the right to be sold in stores and used in salons in the EU.

How to use: Apply Tint base "СLEAR pH6.7" to the prepared nail plate in one or two layers. Cure each layer in a UV/LED lamp for 60 seconds.

Volume: 15 ml

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients: Special acrylic polymers, diphenyl(2,4,6-trimethylbenzoyl), phosphine oxide, acrylic monomer.

Attention! To avoid unwanted polymerization of the material during work, testing, or content creation, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to polymerize.

Note: all documents are in the attached files!

Rubber base HELLO.