HEYLOVE. Frame builder Gel, SILENCE, 30 ml, universal builder gel, milky beige

FRAME gel - universal builder gel for nail extensions in 13 shades

Packaged in a jar with a pump for gel dispensing.

SILENCE - milky beige.

Video (material overview and packaging instructions) at the link: https://www.instagram.com/reel/DDjuzN5tvVi/?igsh=YXAwcGZ1MjFmaTJl

Characteristics:

• for modeling, correction, strengthening, extension without filing;
• medium consistency, closer to liquid;
• self-leveling;
• in a thin layer – elastic, and in a thick layer holds the arch and does not deform;
• creates a durable coating resistant to chips;

How to use:

1. Buff the nail plate with a 180 grit nail file or a 100 grit buffer.
2. Wipe with a degreaser to remove dust, especially under the cuticle and in the side folds.
3. Apply a dehydrator and wait 30 seconds for it to evaporate moisture.
4. Using rubbing motions, apply a priming layer of Rubber base and add a little more base to create a smooth surface. Cure for 30 seconds.
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel as an architectural layer or place it in a top form or on a bottom form (depending on the technique)
7. Polymerize each nail for 30 seconds, then at the end put both hands in for another 1-2 minutes.
8. Remove the sticky layer from the Frame gel and file the surface as needed.
9. Apply No Sticky top or Dark Story top and cure for 1-2 minutes.

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone, Pigments. May
Contain: Cl 77499, Cl 77891, CI 15850, Cl 45380, Cl 47005, Cl 15510

Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Please also note that even on cloudy days, clouds transmit a large amount of ultraviolet radiation, which is sufficient to cause the material to start polymerizing. When painting nail tips, we recommend keeping the working side of the operating UV lamp away from the technician. If the lamp is held with the light facing the technician, unwanted polymerization of the material on the brushes and on the necks of open bottles may occur.

Note: all documents are in the attached files!