HEYLOVE. Frame builder Gel, ROSE CLOUD, 30 ml, universal builder gel, beige pink

FRAME gel - a universal builder gel in 13 shades

Packaged in a pot with a pump for gel dosing.

ROSE CLOUD - beige-pink.

Video (material overview and packaging instructions) at the link: https://www.instagram.com/reel/DDjuzN5tvVi/?igsh=YXAwcGZ1MjFmaTJl

Characteristics:

• for sculpting, correction, strengthening, dust-free building;
• medium consistency, closer to liquid;
• self-leveling;
• in a thin layer – elastic, in a thick layer holds the arch and does not deform;
• creates a strong coating resistant to chips;

How to use:

1. Buff the nail plate with a 180-grit file or 100-grit buffer.
2. Wipe with a degreaser to remove dust, especially under the cuticle and in the side pockets.
3. Apply a dehydrator and wait 30 seconds for it to evaporate moisture.
4. Apply a primer layer of Rubber base with scrubbing motions and add a little more base to create a smooth surface. Cure for 30 seconds.
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel as a structure layer or place into an upper form or onto a lower form (depending on the technique).
7. Cure each nail for 30 seconds, then at the end place both hands for 1-2 minutes.
8. Remove the tacky layer from the Frame gel and perform surface filing as needed.
9. Apply No Sticky or Dark Story top and cure for 1-2 minutes.

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone, Pigments. May
Contain: Cl 77499, Cl 77891, CI 15850, Cl 45380, Cl 47005, Cl 15510

Important! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far as possible from daylight (especially direct sunlight). Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to start polymerizing. When painting nail tips, we recommend keeping the working side of the UV lamp directed away from the technician. If the lamp is on and facing the technician, unwanted polymerization of the material on brushes and the necks of open bottles may occur.

Note: all documents are in the attached files!