ADORE. One Drop Gel, 30 g, #06, Rose water. Gel de construção, leitoso com subtom rosa

Builder gel for nail extensions in a jar with vacuum pump one Drop Gel №06 - milky with pink undertone

one Drop Gel - medium-thick camouflage gel for extensions, strengthening and correction of nail architecture for medium and above medium length.

Used for:
- extensions on upper and lower forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Advantages of one Drop Gel:
+ convenient medium-thick consistency
+ cold polymerization
+ natural shades
The main advantage - excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from natural nail to artificial, adjusting to the color of the nail plate. Convenient to use and store thanks to the vacuum dosing system: one press = one drop. The drop volume is regulated by the pressure on the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Attention: before starting use, remove the transparent protective silicone cap from the pump !

Application technology:
0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail.
1. Degreasing: mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate.
2. Dehydration: apply NAIL FRESHER over the entire nail, let it air dry until a whitish tint appears on the surface of the nail plate.
3. Bonding: if using adhesive base PRO BASE-BOND, skip this step.
4. Base coat: apply a uniform primer layer of base coat PRO BASE-BOND, carefully brushing the side walls and free edge. Polymerize the base coat in UV lamp for 2-3 minutes, in LED lamp for 60 seconds.
5. Strengthening: with a gel brush, apply a thin coat of gel over the entire surface of the nail plate, leaving a 1mm gap from the cuticle. Over the uncured gel, apply a second leveling layer, taking into account the basic principles of modeling with hard materials. Polymerize in UV lamp for 2-4 minutes, in LED lamp for 90 seconds.
Remove the residual tackiness with PREP&FINISH and a lint-free wipe. With a 150/180 grit nail file, perform step-by-step shaping.

PRO tips:
- to facilitate material application, you can use upper forms or gel nail tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2mm.

Extensions: prepare / place the forms one by one on each finger. Apply a thin substrate of the desired length and shape directly onto the lower or upper form, then model the nail architecture with the gel. To create an arch, you can pinch the gel at 7-12 seconds, depending on the type and power of the lamp. Then cure the nail in the lamp until full polymerization of the gel for 60 seconds in LED lamp, 3-4 minutes in UV lamp.
Remove the residual tackiness with PREP&FINISH and a lint-free wipe. With a 150/180 nail file, perform step-by-step shaping.

PRO tip: apply the gel with a minimum 1mm gap from the cuticle to avoid material lifting in this area

Brand: ADORE
Volume: 30 g