Microstop Clean Universal disinfecting agent for cleaning dry heat sterilizers and tools, 500 ml

Microstop Clean - effectively cleans the chamber of a dry heat sterilizer from brown plaque due to combustion products. It also effectively but gently cleans manicure instruments from plaque formed as a result of high temperatures, combustion product deposits, chemical treatment, etc. Except for products made of aluminum, non-ferrous metals and galvanized parts.

For cleaning the sterilizer:

The product is ready to use. Carefully apply the product to the inner surface of the dry heat lid, instrument tray, kraft bag holders and sterilizer chamber with a soft cloth or foam sponge without abrasive. The surface temperature should not exceed 60°C. Leave on the surface for 30 minutes. Thoroughly clean with a dry cloth or sponge. Before the procedure, make sure the dry heat sterilizer has cooled down. Avoid getting the substance on the heating element, thermal fuse and temperature sensor of the dry heat sterilizer.

For delicate cleaning of manicure instruments:

Prepare a solution of water and concentrate in a ratio of 1:2, where 1 is the part of concentrate and 2 is the part of water. The product should be added to water, not vice versa. Load the instruments into the prepared solution for 5-15 minutes depending on the level of contamination. Rinse under running water. Suitable for use in an ultrasonic bath.

ATTENTION!!
Use only as intended! Keep away from children. Do not mix with other products. Do not inhale vapors, avoid contact with eyes, skin and clothing. After use, wash hands thoroughly. All work with the product should be carried out in protective rubber gloves and a protective mask.

Volume: 500 ml

Manufacturer: Microstop, Ukraine