STALEKS. Arch Tweezers. Tweezers for forming nail arch with reverse clamp EXPERT 31 TYPE 2

In order for extended nails to maintain their correct shape for a long time and not differ from natural ones, it is important to create an anatomically correct apex. For this, during the modeling process, the arch is pressed using a special tool — tweezers for forming the nail arch with reverse clamp EXPERT 31 TYPE 2.

Features of STALEKS EXPERT 31 TYPE 2 tweezers:

• belongs to the professional series;
• resistant to mechanical stress;
• made of highest quality medical steel;
• can be disinfected and sterilized.

Method of application:

1. Carry out standard nail preparation before extension, but it is recommended not to soften hands with water.
2. Degrease the nail plate using a special product.
3. Use an acid primer for gel systems, avoiding contact with the cuticle area and lateral ridges to prevent lifting of the artificial coating. Let it dry for 30 seconds.
4. Prime the nail plate with a base and cure in a UV/LED lamp for 30-60 seconds. Cut and place the extension form under the nail.
5. Apply a layer of gel onto the form and shape the architecture of the nail plate. Polymerize for 60 seconds in a UV/LED lamp. Then press the arch and repeat the curing cycle in the lamp.
6. Apply a second layer of gel and polymerize in the lamp. Then, similarly to the first layer, press the arch and let the material cool in the fixed position for 3-4 minutes.
7. Treat the sculpted nail from the outside and inside with a degreaser and, if necessary, give it the desired shape using a nail file.
8. Thoroughly wipe off residual material after filing using a cleaner and a lint-free wipe.
9. Cover the nail plate with a top coat and cure for 60-90 seconds in a UV/LED lamp.
   OR
10. Apply colored gel polish, curing each layer in the lamp. Then cover with a top coat for gel polishes.
11. Wipe off the sticky layer using a degreaser or other liquid.
12. Treat the periungual area with cuticle oil.