Nail sliders SOVADECOR, 017

Thanks to double-layer UV printing with a white underlay, SOVADECOR sliders have an extremely clear and bright image.

The sliders are made of a thin polymer film, thanks to which they easily separate from the backing after soaking and conform to the shape of the nail.

SOVADECOR sliders are very convenient to use, so even nail technicians with little experience can create stunning designs without difficulty.

Step-by-step instructions:

1. Prepare your nails for applying the slider design: do a manicure and apply builder gel / gel polish. If your nails are soft, reinforce them.

2. Apply the background color.

3. On the cured color layers, apply a top coat for better adhesion of the slider to the nail. Cure the top coat in a UV lamp for 1 minute, in an LED lamp — 30 seconds.

4. Choose a slider, trim and prepare it according to the size of the nail.

5. Place the slider paper-side down on a cotton pad soaked in warm water (! 40-50 °C), wait about 15-30 seconds and transfer the image by sliding the slider onto the nail to the base of the cuticle.

6. Smooth the film, pushing out residual water and air with a soft tissue. Dry it in the air or in the lamp. File the ends well and wipe with a lint-free cloth soaked in cleanser to remove dust.

7. Apply 1-2 coats of top coat, curing each layer in the lamp (pay special attention to the ends — they must be well sealed).