Nail sliders SOVADECOR, 067

Thanks to two-layer UV printing with a white backing, SOVADECOR sliders have an extremely clear and bright image.

The sliders are made of thin polymer film, which makes them easy to separate from the backing after soaking and they follow the shape of the nail.

SOVADECOR sliders are very easy to use, so even masters with little experience can create stunning designs without difficulty.

Step-by-step instructions:

1. Prepare your nails for the slider design: do a manicure and apply gel/gel polish. If the nails are soft, strengthen them.

2. Apply a background color.

3. On the dried color layers, apply a top coat for better adhesion of the slider to the nail. Cure the top coat in a UV lamp for 1 minute, in an LED lamp for 30 seconds.

4. Choose a slider, trim and prepare it according to the size of the nail.

5. Place the slider with the paper backing down on a cotton pad soaked in warm water (! 40-50 °C), wait about 15-30 seconds, and transfer the image by sliding the slider onto the nail up to the cuticle base.

6. Smooth the film, pushing out excess water and air with a soft cloth. Air dry or cure in a lamp. File the ends well and wipe with a lint-free cloth soaked in cleanser to remove dust.

7. Apply 1-2 coats of top coat, curing each layer in the lamp (pay special attention to the ends, they need to be well sealed).