Slider design IBDI AIR 172

With IBDI water-based sliders, you can create a special, unique, and bright manicure. Easy application and long-lasting wear. These sliders are convenient to use, even inexperienced nail technicians can create stunning nail designs without difficulty.

STEP-BY-STEP INSTRUCTIONS:

1. Prepare your nails for slider design application: perform a manicure procedure and apply a gel/gel polish coating. If nails are soft, it is recommended to strengthen them.

2. Apply a background color, light shade, or camouflage.

3. On the dried color layers, apply a top coat for better adhesion of the slider design to the nail. Cure the top coat in a UV lamp for 1 minute, in an LED lamp for 30 seconds. Place the slider design on the sticky layer!!!

4. Select the image, trim it, and prepare it to fit the size of the nail.

5. Place the slider design on a cotton pad soaked in warm water at 40-50 degrees (!), with the paper backing facing down (approx. 15-30 seconds), then transfer the image by sliding it onto the nail up to the cuticle base. (!!! Water can be made hotter; with hot water, the film is more elastic and manageable.)

6. Smooth out the film, pushing out any remaining water and air with a soft tissue. Dry it in the air or in a lamp. File the edges well and wipe with a lint-free cloth soaked in a liquid to remove the sticky layer, cleaning off any dust residue.

7. Finally, cover with a top coat in 1-2 layers, curing each layer, and seal the edges well!!!