Slider design IBDI #527

With IBDI sliders, you can create a special, unique, and bright manicure. Simple and convenient application and long-lasting wear — are among their main advantages.

Step-by-step instructions:

1. Prepare the nails for the slider design application: do a manicure and coat with builder gel/gel polish.
2. Apply a background color — a light shade or camouflage.
3. On the cured color layers, apply a top coat for better adhesion of the slider design to the nail. Cure the top coat in a UV lamp for 1 min, in an LED lamp for 30 sec. The slider design must be applied onto the tacky layer!
4. Choose the slider design, trim and prepare it according to the nail size.
5. Place the slider design on a cotton pad soaked in warm water at 40-50 degrees (!) with the paper backing facing down (approx. 15-30 sec), transfer the image onto the nail up to the cuticle base. You can use hotter water, this will make the film more elastic and easier to remove!
6. Smooth the slider design, pushing out any remaining water and air with a soft tissue. Dry in the air or in the lamp. File the free edges well and wipe with a lint-free wipe moistened with a tacky layer remover.
7. Apply a top coat (1-2 coats), curing each coat and sealing the edges well.