ADORE. Aura Base, №05, 8 ml. Colored base with shimmer, purple

Color-changing base with microshimmer No. 05 – violet

AURA BASE is a palette of light colored bases with microglitter, an art collaboration between the ADORE professional brand and the talented nail artist @culturamanicura. Delicate semi-transparent chameleon shades scatter incredible microglitter both in sunlight and under artificial lighting.

The base has a thin texture of medium viscosity. It can be used as a minimal leveling layer in the liquid base leveling technique. Recommended for application over a primer layer of base coat.

Used as an independent camouflage shade or as a base/design element. Control the color and shine saturation by the thickness and number of material layers.

Recommended for all nail types.

Main advantage – speeds up design creation.

Consistency: liquid
Polymerization speed: high
After polymerization: medium-hard
Pigmentation: medium
Acidity: medium

Application technology:

0. Prepare the nail plate: perform a manicure, shape the free edge of the nail as desired.

1. Degreasing: mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate

2. Dehydration: apply NAIL FRESHER to the entire nail, let it air-dry until a whitish tint appears on the nail plate surface.

3. Bonding*: with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving a 1mm gap from the cuticle and side walls. Let it air-dry for 15 seconds.

* when using MULTI BASE, skip this step

4. Base layer: apply a primer base coat in a thin/rubbing layer. Cure the base coat in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds

5. Color: apply AURA BASE in a thin layer. If necessary, do minimal leveling of the nail plate up to 1mm, or apply a second layer. Cure the base in a UV lamp for 2-4 minutes, in an LED lamp - 60 seconds.

PRO tips:

· to distribute the glitter more evenly over the nail, you can use a liner brush

· for sensitive or damaged nails, apply the product in thin layers without leveling to avoid a thermal burn during curing