ADORE. Loli Poly Base, №02, Taffy, 15 ml. Color poly base

Strengthening polybase #02 – tender lilac

LOLI BASE – a thick elastic colored base in delicate summer shades reminiscent of fruit lollipops.

It has no strong odor. Apply in 1-2 coats. Suitable for leveling the nail plate using the thick base/gel leveling technique. Well self-levels into a drop when the hand is turned over. No shrinkage. Easily dissolves with GEL REMOVER, does not clog the bit.

An important advantage of the base is its strengthening effect.

It is used as a tinted base coat under complex gel polish shades or as a standalone color coat.

Consistency: thick.
Polymerization speed: medium.
After polymerization: hard.
Pigmentation: medium.
Acidity: low.

Recommended for all nail types.

Application technique:

0. Prepare the nail plate for coating: do a manicure, shape the free edge as desired. When using remover, remove any residue with a damp wipe.
1. Degreasing: mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate.
2. Dehydration: apply NAIL FRESHER to the entire nail, let air-dry until a whitish tint appears on the nail plate surface.
3. Bonding: with a semi-dry brush apply acid-free primer ULTRABOND to the entire nail, leaving a 1mm gap from the cuticle and side walls. Let air-dry for 15 seconds.
*when using MULTI BASE this step can be skipped
4. Base layer: apply a priming layer of cushioning base coat MULTI/RUBBER BASE in a thin/scrubbing layer. Cure the base coat in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds.
5. Color: apply LOLI BASE. If necessary, level the nail plate. Cure the base in a UV lamp for 2-4 minutes, in an LED lamp for 60 seconds.
6. Top coat: seal the coating with a top coat. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 1 minute.