LUNAmoon. Premium Builder Gel #23 Light nude, 100 ml, builder gel, light nude

Classic builder gel for extension Premium – a polymer light-curing material that, due to its strength, allows you to significantly lengthen the nail plate. It contains photoinitiators that start the polymerization process when the material is exposed to ultraviolet light of a specific wavelength.

Features:

• Acid-free.
• Has cushioning, does not crack upon impact.
• Medium consistency.
• Medium pigmentation, covers the free edge.
• Suitable for the "extension without filing" technique.
• Suitable for extension "on top forms".
• Does not cause burning in the lamp.
• Becomes thicker in cold, thinner in warmth.
• Thixotropic — becomes thinner when moving the brush during work.
• Can be additionally heated to make the gel thinner.
• Hard at a thickness of 1 mm. If thickness is less than 1 mm, it may bend slightly, but this does not affect wear.
• Does not shrink and holds the arch well.
• Requires a layer of Rubber Base.
• Wavelength for polymerization: 365-405 nm.
• UV/LED lamp power: 36-48W.
• Allowable coating thickness: 0.5 mm at the tip / 1 mm at the apex.
• Full polymerization: 120 seconds.

Application method: 

STRENGTHENING

1. Removal.
2. Do not file the nail shape, or leave 2 mm length which will be removed after leveling.
3. Using a 220 grit file, lightly file the nail from above without strong pressure to lift the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after.
6. Degrease the nail using Nail Prep LUNAmoon. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, wrap a cloth around it, and wipe everything in the cuticle area and sinuses.
7. Primer is optional, but if the base for the underlay has sufficient acidity, it is not needed.
8. Apply the underlay with Rubber Base LUNAmoon, preferably with a flat gel brush. Movements should be rubbing. Draw all nail sinuses and cure in the lamp for 60 seconds.
9. Wipe off the dispersion layer.
10. Level. If leveling with gel, leave a 0.5–1 mm gap from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the edge of the nail to hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will start to separate from the hard material from the free edge.
13. After filing, wipe off the dispersion layer and apply gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe anything to avoid losing shine.

CLASSIC EXTENSION

1. Removal.
2. Shorten the nail length to 1 mm and make a round shape.
3. Using a 220 grit file, lightly file the nail from above without strong pressure to lift the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after.
6. Degrease the nail using Nail Prep LUNAmoon. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, wrap a cloth around it, and wipe everything in the cuticle area and sinuses.
7. Use LUNAmoon primer.
8. Apply the underlay with Rubber Base LUNAmoon, preferably with a flat gel brush. Movements should be rubbing. Draw all nail sinuses and cure in the lamp for 60 seconds.
9. Wipe off the dispersion layer.
10. Set the form for extending the free edge of the nail.
11. Lay out the artificial nail shape with clear gel. Cure for 30 seconds.
12. File the free edge and give the nail the desired shape.
13. Wipe off dispersion layer and excess dust.
14. Go over areas where the file was used again with Rubber Base LUNAmoon. Cure for 30 seconds.
15. Level with gel, place in the lamp, and clamp at 10–15 seconds. If the gel has strong stickiness or contains glitter, clamp at 20 seconds.
16. Finish curing in the lamp for 120 seconds.
17. Wipe off the dispersion layer before applying gel polish.
18. Apply top coat. Cure for 120 seconds. After curing, do not wipe anything to avoid losing shine.

Product shelf life: 24 months. Keep opened no longer than 18 months.

Volume: 100 ml

TPO FREE
(Product photos on the site may differ from the actual product)