LUNAmoon. Premium Builder Gel #02 Milky, 100 ml, builder gel, milky

Classic extension gel Premium – a polymer light-curing material that, due to its strength, allows significant lengthening of the nail plate. It contains photoinitiators that trigger the polymerization process when the material is exposed to ultraviolet light of a specific wavelength.

Features:

• Acid-free.
• Has shock absorption, does not crack upon impact.
• Has medium consistency.
• Has medium pigmentation, covers the free edge.
• Suitable for the "extension without filing" technique.
• Suitable for extension on top forms.
• Does not cause burning in the lamp.
• Becomes thicker in cold, and thinner in heat.
• Thixotropic — becomes thinner when moving the brush during work.
• Can be additionally heated to make the gel thinner.
• Hard at 1 mm thickness. If thickness is less than 1 mm, it may bend slightly, but this does not affect wear.
• No shrinkage and holds the arch well.
• Requires a base coat of Rubber Base.
• Wavelength for polymerization 365-405 nm.
• Power of UV/Led lamp 36-48W.
• Permissible coating thickness 0.5 mm at the edge/ 1 mm at the apex.
• Full polymerization 120 seconds.

Application method: 

STRENGTHENING

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which will be removed after leveling.
3. Using a 220 grit file, file the nail from above without strong pressure, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform manicure.
5. If working with removers, wash hands with soap after working with them.
6. Degrease the nail using Nail Prep LUNAmoon. Do two approaches. Use 4 wipes (1 wipe for 5 fingers). First approach: wipe the nail surface. Second approach: take an orange stick, put a wipe on it and wipe everything in the cuticle area and in the sinuses.
7. Use primer optionally, but if the base for the base coat has sufficient acidity, it is not needed.
8. It is best to apply a base coat of Rubber Base LUNAmoon with a flat gel brush. The movements should be rubbing. Paint all the sinuses of the nail and dry in the lamp for 60 seconds.
9. Wipe off the stickiness.
10. Level. If leveling with gel, leave a 0.5–1 mm gap from the cuticle. Dry in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to form a thickness at the edge of the nail that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material peeling. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material at the free edge.
13. After filing, wipe off the stickiness and apply gel polish.
14. Apply top coat. Dry for 120 seconds. After drying, do not wipe anything, as the shine may be lost.

CLASSIC EXTENSION

1. Removal
2. Shorten the nail length to 1 mm and make a round shape.
3. Using a 220 grit file, file the nail from above without strong pressure, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform manicure.
5. If working with removers, wash hands with soap after working with them.
6. Degrease the nail using Nail Prep LUNAmoon. Do two approaches. Use 4 wipes (1 wipe for 5 fingers). First approach: wipe the nail surface. Second approach: take an orange stick, put a wipe on it and wipe everything in the cuticle area and in the sinuses.
7. Use primer LUNAmoon.
8. It is best to apply a base coat of Rubber Base LUNAmoon with a flat gel brush. The movements should be rubbing. Paint all the sinuses of the nail and dry in the lamp for 60 seconds.
9. Wipe off the stickiness.
10. Place the form for extending the free edge.
11. Apply clear gel to form the artificial nail shape. Dry for 30 seconds.
12. File the free edge and give the nail the desired shape.
13. Wipe off stickiness and excess dust.
14. Go over again with Rubber Base LUNAmoon on the areas where you used the file. Dry for 30 seconds.
15. Level with gel, place in the lamp and clamp at the 10-15th second. If the gel has strong stickiness or contains glitter, clamp at the 20th second.
16. Finish curing in the lamp for 120 seconds.
17. Wipe off stickiness before applying gel polish.
18. Apply top coat. Dry for 120 seconds. After drying, do not wipe anything, as the shine may be lost.

Shelf life of the product: 24 months. Store no more than 18 months after opening.

Volume: 100 ml

TPO FREE
(Product image on the site may differ from the actual product)