You Are Cute. Bottle Gel #01, 15 ml, liquid gel

LIQUID GEL BOTTLE GEL — innovative material for strengthening, leveling, and adding length to nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. Such a gel can completely replace the base.

Features:

• Polymerization wavelength — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Allowable coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, has a medium consistency.
• Has medium pigmentation, covers the free edge.
• Full polymerization takes 120 seconds.
• Suitable only for strengthening the nail and adding length.
• Has good flexibility.
• When strengthening with this gel, you need to file the natural nail.
• Requires a Rubber Base underlay.
• It can be additionally warmed up to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. File with a 220 grit file without strong pressure on the top of the nail, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, wrap a wipe around it, and wipe everything in the cuticle area and sidewalls.
7. Use primer optionally, but if the base for the underlay has sufficient acidity, it is not needed.
8. The Rubber Base underlay is best applied with a flat gel brush. Movements should be rubbing. Paint all nail sidewalls and cure in a lamp for 60 seconds.
9. Wipe off the tacky layer.
10. Level. If leveling with gel, leave a 0.5–1 mm gap from the cuticle. Cure in a lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will start separating from the hard material from the free edge.
13. After filing, wipe off the tacky layer and apply gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 15 ml

Brand: You Are Cute

Country: Ukraine