You Are Cute. Bottle Gel #03, 15 ml, liquid gel

LIQUID GEL BOTTEL GEL — an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coatings. Such a gel can completely replace the base.

Features:

• Wavelength for polymerization — 365–405 nm.
• Power of UV/LED lamp — 36–48 W.
• Allowable coating thickness — 0.5 mm at the edge of the nail, 1 mm at the apex.
• Acid-free, has a medium consistency.
• Has medium pigmentation, covers the free edge.
• Full polymerization occurs in 120 seconds.
• Suitable only for nail strengthening and extension.
• Has good shock absorption.
• When strengthening with this gel, you need to file the natural nail.
• Requires a Rubber Base underlay.
• It can be additionally heated to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. Using a 220 grit nail file, file without strong pressure on top of the nail, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail using Nail Prep. Do two approaches. Use 4 wipes (1 wipe for 5 fingers). First approach: wipe the surface of the nail. Second approach: take an orange stick, put a wipe on it, and wipe everything in the cuticle area and sinuses.
7. Primer is optional, but if the base for the underlay has sufficient acidity, it is not needed.
8. The Rubber Base underlay is best applied with a flat gel brush. Movements should be rubbing. Paint all the sinuses of the nail and dry in the lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Level. If leveling with gel, leave a 0.5–1 mm gap from the cuticle. Dry in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary so that a thickness forms at the edge of the nail that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material peeling. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
13. After filing, wipe off the sticky layer and cover with gel polish.
14. Cover with top coat. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 15 ml

Brand: You Are Cute

Country: Ukraine