You Are Cute. Bottle Gel #09, 5 ml, liquid gel with shimmer

LIQUID GEL BOTTEL GEL — an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coatings. Such a gel can completely replace the base.

Features:

• Wavelength for polymerization — 365–405 nm.
• Power of UV/LED lamp — 36–48 W.
• Allowable coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Full polymerization occurs in 120 seconds.
• Suitable only for strengthening and extending the nail.
• Has good cushioning.
• When strengthening with this gel, you need to file the natural nail.
• Requires a Rubber Base underlay.
• It can be additionally warmed up to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which will be removed after leveling.
3. File with a 220 grit file without strong pressure on top of the nail, lifting the scales of the nail plate, or use a buffer 100 grit.
4. Do a manicure.
5. If working with removers, wash hands with soap after working with them.
6. Degrease the nail using Nail Prep. Do two approaches. Use 4 wipes for this (1 wipe per 5 fingers). First approach: wipe the nail surface. Second approach: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and grooves.
7. Use Primer optionally, but if the base for underlay has sufficient acidity, it is not needed.
8. It is best to apply the Rubber Base underlay with a flat gel brush. Movements should be rubbing. Draw all nail grooves and dry in the lamp for 60 seconds.
9. Remove stickiness.
10. Level. If leveling with gel, make a gap of 0.5–1 mm from the cuticle. Dry in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary so that a thickness is formed at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
13. After filing, remove stickiness and apply gel polish.
14. Apply top coat. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 5 ml

Brand: You Are Cute

Country: Ukraine