You Are Cute. Bottle Gel #09, 15 ml, liquid gel with shimmer

LIQUID GEL BOTTLE GEL — an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coatings. This gel can completely replace the base.

Features:

• Wavelength for polymerization — 365–405 nm.
• Power of UV/LED lamp — 36–48 W.
• Permissible coating thickness — 0.5 mm at the edge of the nail, 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Full polymerization takes 120 seconds.
• Suitable only for nail strengthening and extension.
• Good amortization.
• When strengthening with this gel, the natural nail needs to be filed.
• Requires a Rubber Base underlay.
• It can be additionally heated to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. Using a 220 grit file, file without strong pressure on the top of the nail, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail with Nail Prep. Do two approaches. Use 4 wipes (1 wipe per 5 fingers). First approach: wipe the nail surface. Second approach: take an orange stick, put a wipe on it and wipe everything in the cuticle area and the sinuses.
7. Use primer if desired, but if the base for the underlay has sufficient acidity, it is not necessary.
8. It is best to apply the Rubber Base underlay with a flat gel brush. Movements should be rubbing. Paint all nail sinuses and dry in the lamp for 60 seconds.
9. Wipe off the stickiness.
10. Level. If leveling with gel, make a 0.5–1 mm indent from the cuticle. Dry in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create a thickness on the edge of the nail that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material peeling. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
13. After filing, wipe off the stickiness and apply gel polish.
14. Apply top coat. Dry for 120 seconds. Do not wipe anything after drying, as the shine may be lost.

TPO FREE

Volume: 15 ml

Brand: You Are Cute

Country: Ukraine