You Are Cute. Bottle Gel #17, 5 ml, liquid gel

LIQUID GEL BOTTEL GEL — an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coatings. This gel can completely replace base.

Features:

• Polymerization wavelength — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Allowable coating thickness — 0.5 mm at the edge of the nail, 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Full polymerization occurs in 120 seconds.
• Suitable only for nail strengthening and extension.
• Good cushioning.
• When strengthening with this gel, the natural nail needs to be filed.
• Requires a Rubber Base underlay.
• It can be additionally warmed to make the gel more liquid.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which will be removed after leveling.
3. Using a 220 grit file, dust the nail from above without strong pressure, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after handling them.
6. Degrease the nail using Nail Prep. Perform two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Use primer optionally, but if the base for the underlay has sufficient acidity, it is not needed.
8. It is best to apply the Rubber Base underlay with a flat gel brush. Movements should be rubbing. Cover all nail sidewalls and cure in the lamp for 60 seconds.
9. Wipe off the tacky layer.
10. Level it. If leveling with gel, leave a 0.5–1 mm gap from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary so that a thickness is formed at the edge of the nail to hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material peeling. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material at the free edge.
13. After filing, wipe off the tacky layer and cover with gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 5 ml

Brand: You Are Cute

Country: Ukraine