You Are Cute. Bottle Gel #22, 5 ml, liquid gel with white flowers

LIQUID GEL BOTTEL GEL — an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coatings. This gel can completely replace the base.

Features:

• Wavelength for polymerization — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Allowable coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Full polymerization occurs in 120 seconds.
• Suitable only for nail strengthening and extension.
• Good shock absorption.
• When strengthening with this gel, the natural nail must be filed.
• Requires a Rubber Base underlayer.
• Can be additionally heated to make the gel thinner.

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which will be removed after leveling.
3. Using a 220 grit nail file, file without strong pressure on the top of the nail, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after use.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe for 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Use primer optionally, but if the base for the underlayer has sufficient acidity, it is not needed.
8. It is best to apply the Rubber Base underlayer with a flat gel brush. Movements should be rubbing. Paint all nail sidewalls and cure in the lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Level. If leveling with gel, leave a 0.5–1 mm gap from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. This will prevent material lifting. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material at the free edge.
13. After filing, wipe off the sticky layer and apply gel polish.
14. Apply top coat. Cure for 120 seconds. Do not wipe after curing, as the shine may be lost.