You Are Cute. Bottle Gel #28, 5 ml, liquid translucent gel

РІДКИЙ ГЕЛЬ BOTTEL GEL — an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. This gel can completely replace base.

Features:

• Polymerization wavelength — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Allowable coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Full polymerization in 120 seconds.
• Suitable only for nail strengthening and extension.
• Good amortization.
• When strengthening with this gel, the natural nail must be filed.
• Requires a Rubber Base underlayer.
• It can be additionally heated to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm length to be removed after leveling.
3. Using a 220 grit file, file the nail without strong pressure from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If using removers, wash hands with soap afterwards.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Primer is optional, but if the base underlayer has sufficient acidity, it is not needed.
8. Apply the Rubber Base underlayer best with a flat gel brush. Movements should be rubbing. Paint all nail sinuses and cure in the lamp for 60 seconds.
9. Wipe off the stickiness.
10. Level. If leveling with gel, leave a 0.5–1 mm gap from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. This will prevent material detachment. If the material is hard and the nail is very soft, the nail itself will start separating from the hard material at the free edge.
13. After filing, wipe off stickiness and apply gel polish.
14. Apply top coat. Cure for 120 seconds. Do not wipe after curing, as shine may be lost.

CLASSIC EXTENSION:

1. Removal.
2. Shorten the nail length to 1 mm and make a round shape.
3. Using a 220 grit file, file the nail without strong pressure from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If using removers, wash hands with soap afterwards.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Use primer.
8. Apply the Rubber Base underlayer best with a flat gel brush. Movements should be rubbing. Paint all nail sinuses and cure in the lamp for 60 seconds.
9. Wipe off the stickiness.
10. Set the form for extending the free edge of the nail.
11. Apply the artificial nail shape with clear gel. Cure for 30 seconds.
12. File the free edge and give the nail the desired shape.
13. Wipe off stickiness and excess dust.
14. Go over the areas where the file was used again with Rubber Base. Cure for 30 seconds.
15. Level with gel, place in the lamp, and pinch at 10–15 seconds. If the gel has strong stickiness or contains glitter, pinch at 20 seconds.
16. Cure fully in the lamp for 120 seconds.
17. Wipe off stickiness before applying gel polish.
18. Apply top coat. Cure for 120 seconds. Do not wipe after curing, as shine may be lost.

TPO FREE