You Are Cute. Builder Gel #46, 15 ml, builder gel with shimmer

Builder Gel – a polymer light-curing material that, due to its strength, allows you to significantly extend the nail plate. It contains photoinitiators that start the polymerization process when the material is exposed to ultraviolet light of a certain wavelength.

Features:

• Acid-free.
• Has shock absorption, does not crack upon impact.
• Medium consistency.
• Medium pigmentation, covers the free edge.
• Suitable for the "filing-free extension" technique.
• Suitable for "on upper forms" extension.
• Does not cause burning in the lamp.
• Becomes thicker in cold, and thinner in heat.
• Thixotropic – becomes thinner if you move the brush while working.
• Can be additionally warmed up to make the gel thinner.
• Hard at a thickness of 1 mm. If thickness is less than 1 mm, it may bend slightly, but this does not affect wear.
• Does not shrink and holds the arch well.
• Requires a Rubber Base underlayer.
• Wavelength for polymerization 365-405 nm.
• UV/LED lamp power 36-48W.
• Allowable coating thickness 0.5 mm at the end / 1 mm at the apex.
• Full polymerization 120 seconds.

Application method:

STRENGTHENING

1. Removal.
2. Do not file the nail shape or leave 2 mm length to be removed after leveling.
3. Using a 220 grit file, file the top of the nail without strong pressure, lifting the nail plate scales, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, wrap a wipe around it, and wipe everything in the cuticle area and side sinuses.
7. Primer is optional, but if the base for underlayer has sufficient acidity, it is not needed.
8. It is best to apply the underlayer of Rubber Base with a flat gel brush. Movements should be rubbing. Paint all nail sinuses and cure in the lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Level. If leveling with gel, leave a 0.5–1 mm gap from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create a thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. This will prevent material peeling. If the material is hard and the nail is very soft, the nail itself will start to separate from the hard material at the free edge.
13. After filing, wipe off the sticky layer and cover with gel polish.
14. Cover with top. Cure for 120 seconds. After curing, do not wipe with anything, as shine may be lost.

CLASSIC EXTENSION

1. Removal
2. Shorten the nail length to 1 mm and make a round shape.
3. Using a 220 grit file, file the top of the nail without strong pressure, lifting the nail plate scales, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, wrap a wipe around it, and wipe everything in the cuticle area and side sinuses.
7. Use primer
8. It is best to apply the underlayer of Rubber Base with a flat gel brush. Movements should be rubbing. Paint all nail sinuses and cure in the lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Set the form for extending the free edge of the nail.
11. Apply clear gel to form the artificial nail. Cure for 30 seconds.
12. File the free edge and give the nail the desired shape.
13. Wipe off the sticky layer and excess dust.
14. Go over again with Rubber Base on areas where you used the file. Cure for 30 seconds.
15. Level with gel, place in the lamp and press at the 10-15th second. If the gel has strong stickiness or contains glitter, press at the 20th second.
16. Finish curing in the lamp for 120 seconds.
17. Wipe off the sticky layer before covering with gel polish.
18. Cover with top. Cure for 120 seconds. After curing, do not wipe with anything, as shine may be lost.

(Product photos on the site may differ from the actual product)

TPO FREE