You Are Cute. Bottle Gel #23, 15 ml, liquid gel with white flowers

LIQUID GEL BOTTEL GEL — an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coatings. Such gel can completely replace base.

Features:

• Wavelength for polymerization — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Permissible coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Full polymerization occurs in 120 seconds.
• Suitable only for nail strengthening and extension.
• Good cushioning.
• When strengthening with this gel, the natural nail must be filed.
• Requires an underlayer of Rubber Base.
• Can be additionally warmed to make the gel thinner.

Application Method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which will be removed after leveling.
3. With a 220 grit file, file lightly without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after use.
6. Degrease the nail using Nail Prep. Do two approaches. Use 4 wipes (1 wipe per 5 fingers). First approach: wipe the nail surface. Second approach: take an orange stick, put a wipe on it, and wipe everything in the cuticle area and the nail folds.
7. Primer is optional, but if the base for the underlayer has sufficient acidity, it is not needed.
8. The Rubber Base underlayer is best applied with a flat gel brush. Movements should be rubbing. Draw all the nail folds and cure in the lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Level. If leveling with gel, make an indent of 0.5–1 mm from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary so that a thickness is created at the edge of the nail that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. This will prevent material peeling. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material at the free edge.
13. After filing, wipe off the sticky layer and cover with gel polish.
14. Cover with top. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 15 ml

Brand: You Are Cute

Country: Ukraine