HEYLOVE. Tint base, LACE, 30 ml, tinted base
Thanks to its dense pigmentation and elasticity, the LACE tinted base creates a perfectly even coverage after just the first coat.
Shade: pastel cool pink
Collection: SUNSET
Video: https://www.instagram.com/reel/DObOFRPCGNz/?igsh=MXNocmR1MTVuYjJ6cw==
Consistency: medium
Hardness/Elasticity: elastic
Acidity: neutral, pH=6.7
Smell: neutral
Pigmentation: dense, covers the free edge
How to use:
-
Thoroughly degrease the nail plate using a dehydrator phBond.
- Apply an acid-free primer Ultrabond to the nail tip and wait for complete drying.
-
Apply a layer of transparent base Rubber base as a base coat and polymerize for 30 seconds.
-
Apply one or two coats of Tint base. Polymerization time in a UV/LED lamp is 60 seconds.
-
Finally, apply a top coat top coat.
Volume: 30 ml
Manufacturer: TM "HEYLOVE"
Country: Ukraine
Ingredients (INCI): Polyacrylic Acid, HEMA, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Silica. May Contain: Cl 45380, Cl 15850, Cl 77491, CI 15985, CI 77492, Cl 77007, Cl 77510, CI 77742, CI 77289, CI 77499, CI 77891, CI 7700
Attention! To avoid unwanted polymerization of the material during work, testing, or content creation, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation sufficient to cause the material to polymerize. When painting nail tips, we recommend keeping the working side of the operating UV lamp away from the master. If you hold the turned-on lamp with light directed towards the master, unwanted polymerization of the material on brushes and necks of open bottles may occur.
Note: All documents are in the attached files!
How to prevent bubbles in the material?Bubbles can appear in any liquid. This does not depend on the formula or ingredients. It depends on density (viscosity).
This is simply a law of physics, nothing else.
For example, in water, bubbles last very briefly and escape on their own.
If we take thicker liquids (honey, thick builder gel, etc.) - bubbles readily settle in these products and do not leave as quickly as water.
Same with base. If you work carelessly with the brush, plunging it sharply into the bottle, it unintentionally acts as a blender, mixing the material with air, creating bubbles. This is especially true for materials in bottles with a brush.
Therefore, make GENTLE, soft brush movements!
Especially when the bottle is new and full.
When we were developing the tint base product, we had a choice of density. We deliberately chose a medium-density consistency because it has advantages:
- the material does not run or seep anywhere;
- clear contours without extra effort;
- the master calmly applies the architecture and has time to check it by reflection;
- there is no need to apply a second layer to refine the architecture or camouflage the free edge.
Our production facility has equipment that prevents bubble formation in the material at all stages - from pigment mixing to bottling into bottles.
We also warn our partners that we are against store consultants opening a bottle to show the material to a client. Because a consultant who is not a master does not understand that the brush can create bubbles, even without realizing it.
Not to mention that bottle necks look unaesthetic when they are soiled with material all the way to the top.
If bubbles appear in the material, how to fix it?
Unscrew the bottle cap, but do not remove the brush.
Place it in a warm (but not hot!) place overnight.
Or put the bottle in a plastic bag and immerse it in warm water (up to the shoulders).
According to the law of physics, in a warm environment molecules move faster, and this speeds up the process.
Air will rise to the surface, as it is lighter than liquid.
- Opaque
- Ukraine
- Розовые