HEYLOVE. Tint base, TRUE RED, 15 ml, tinted base
Thanks to its dense pigmentation and elasticity, tint base TRUE RED creates a perfectly smooth coating after just the first application.
Shade: classic red
Collection: MET GALA
Consistency: medium
Hardness/elasticity: elastic
Acidity: neutral, pH=6.7
Smell: neutral
Pigmentation: dense, covers the free edge
Application method:
-
Thoroughly degrease the nail plate with a dehydrator phBond.
- Apply an acid-free primer to the tip of the nail Ultrabond and wait for the liquid to dry completely.
-
Apply a layer of transparent base Rubber base as a foundation and cure for 30 seconds.
-
Apply one or two layers of Tint base. Curing time in a UV\/LED lamp is 60 seconds.
-
As the last layer, apply top coat (top).
Volume: 15 ml
Manufacturer: TM "HEYLOVE"
Country: Ukraine
Composition (INCI): Polyacrylic Acid, HEMA, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Silica. May Contain: Cl 45380, Cl 15850, Cl 77491, CI 15985, CI 77492, Cl 77007, Cl 77510, CI 77742, CI 77289, CI 77499, CI 77891, CI 7700
Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is enough to start polymerizing the material. When painting tips, we recommend keeping the working side of the UV lamp turned away from the master. If you hold the turned-on lamp with the light towards the master, unwanted polymerization of the material on the brushes and necks of open bottles may occur.
Note: all documents are in the attached files!
How to prevent bubbles in the material?Bubbles can appear in any liquid. This does not depend on the formula or ingredients. It depends on the density (viscosity).
It's just a law of physics, nothing else.
For example, in water, bubbles stay very briefly and leave on their own.
If we take thicker liquids (honey, thick builder gel, etc.) - in these products, bubbles settle willingly and do not leave them as quickly as water.
Same with base. If you work carelessly with a brush, sharply dipping it into the bottle, it involuntarily acts as a blender that mixes the material with air, forming bubbles. This is especially true for materials in bottles with a brush.
Therefore, we make CAREFUL, gentle movements with the brush!
Especially when the bottle is new and full.
When we were developing the tint base product, we had a choice of density. We deliberately chose a medium-density consistency because it has advantages:
- material does not run or flood;
- clear contours without extra effort;
- the master can calmly lay the architecture and has time to check it by the gloss;
- no need to apply a second layer to refine the architecture or camouflage the free edge.
Our production facility has equipment that prevents the formation of bubbles in the material at all stages - from pigment mixing to bottling.
We also warn our partners that we are against a consultant in the store opening the bottle for the client and showing the material. Because a consultant who is not a master does not understand that the brush can create bubbles, even without realizing it.
Not to mention that the necks of the bottles look unaesthetic when they are dirtied with material all the way to the top.
If bubbles appear in the material, how to fix it?
Unscrew the bottle cap, but do not remove the brush.
Place in a warm (but not hot!) place overnight.
Or put the bottle in a plastic bag and immerse it in warm water (up to the neck).
By the law of physics, in a warm environment molecules move faster, and this speeds up the process.
Air will come to the surface; it is lighter than the liquid.
- Opaque
- Ukraine
- Красные/бордовые