HEYLOVE. Flow base, RIZZ, 15 ml, colored base of medium-thin consistency

Thanks to its dense pigmentation and elasticity, the tinted base RIZZ creates a perfectly even coating right after the first layer.

Shade: milky peach

Collection: EVERYDAY

Collection overview at the link: https://www.instagram.com/p/DE4x8s7ICUB/

Consistency: medium, close to thin

Hardness/Elasticity: elastic

Acidity: neutral, pH=6.5

Scent: neutral

Pigmentation: dense, covers the free edge

Application method:

• Thoroughly degrease the nail plate using the dehydrator phBond.
• Apply acid-free primer Ultrabond to the nail tip and wait for the liquid to dry completely.
• Apply a layer of clear base Rubber base as a substrate and cure for 30 seconds.
• Apply one or two layers of Flow base. Cure time in a UV/LED lamp is 60 seconds.
• As the final layer, apply a finish coating (top).

Volume: 15 ml

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Composition (INCI): Polyacrylic Acid, HEMA, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenyiphosphinate, Silica. May Contain: Cl 45380, Cl 15850, Cl 77491, Cl 15985, CI 77492, Cl 77007, CI 77510, Cl 77742, Cl 77289, CI 77499, CI 77891, Cl 7700

Caution! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far as possible from daylight (especially direct sunlight). Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient to start the polymerization of the material. When painting nail tips, we recommend keeping the working side of the UV lamp turned away from the technician. If the lamp is turned on toward the technician, unwanted polymerization of the material may occur on the brushes and necks of open bottles.

Note: all documents are in the attached files!

How to prevent bubbles in the material?

Bubbles can appear in any liquid. It does not depend on the formula or ingredients. It depends on the density (viscosity).
This is simply a law of physics, nothing else.

For example, in water, bubbles last a very short time and come out on their own.
If we take thicker liquids (honey, thick builder gel for extensions, etc.) - in these products, bubbles eagerly settle in and do not leave them as quickly as water.

So it is with the base. If you carelessly work with the brush, sharply dipping it into the bottle, involuntarily it acts as a blender, mixing the material with air, forming bubbles. This is especially true for materials in bottles with a brush.

Therefore, we make CAREFUL, gentle brush movements!
Especially when the bottle is new and full.

When we were working on the development of the tint base product, we had a choice of density. We consciously chose a medium-density consistency, because it has advantages:
- the material does not run or bleed anywhere;
- contours are clear without extra effort;
- the technician calmly builds the architecture and has time to check it by the reflection;
- there is no need to apply a second layer to refine the architecture or camouflage the free edge.

At our production facility, we have equipment that prevents the formation of bubbles in the material at all stages - from mixing the pigment to bottling.

We also warn our partners that we are against a store consultant opening a bottle for a client and showing the material. Because a consultant who is not a technician does not understand that bubbles can be created with the brush, without even realizing it.
Not to mention that the necks of the bottles look unsightly when they are soiled with material all the way to the top.

If bubbles appear in the material, how to fix it?

Unscrew the bottle cap, but do not pull out the brush.
Place it in a warm (but not hot!) place overnight.
Or put the bottle in a plastic bag and submerge it in warm water (up to the shoulders).

According to the law of physics, in a warm environment, molecules move faster, and this accelerates the process.
The air will rise to the surface, as it is lighter than the liquid.