ADORE. One Drop Gel, 30 g, #05, Soft almond. Builder gel, milky peach

Nail extension gel in a jar with a vacuum pump one Drop Gel №05 - milky peach

one Drop Gel - medium-density camouflage gel for nail extension, strengthening and correction of nail architecture of medium and slightly long nails.

Used for:
- extensions on upper and lower forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Advantages of one Drop Gel:
+ convenient medium-thick consistency
+ cold polymerization
+ natural shades
The main advantage is excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from the natural nail to the artificial one, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dosing system: one press = one drop. The drop volume is regulated by the force of pressing the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before use, you need to remove the transparent protective silicone cap from the pump !

Application technique:
0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail.
1. Degreasing: mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the NP
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air dry until a whitish shade appears on the surface of the NP
3. Bonding: when using adhesive base PRO BASE-BOND, skip this step
4. Base layer: apply an even primer layer of base coat PRO BASE-BOND, carefully covering the side walls and free edge. Cure the base coat in a UV lamp for 2-3 min, in an LED lamp for 60 sec.
5. Strengthening: using a gel brush, apply a rubbing layer of gel over the entire surface of the NP, leaving 1mm from the cuticle. Apply a second leveling layer on the uncured gel, following the basic principles of modeling with hard materials. Cure in a UV lamp for 2-4 min, in an LED lamp for 90 sec.
Remove the sticky residue with PREP&FINISH and a lint-free wipe. With a 150/180 grit nail file, perform step-by-step filing of the shape.

PRO tips:
- for easier material application, you can use upper forms or gel tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2mm.

Extension: prepare/install the forms one by one on each finger. Place a thin substrate of the desired length and shape directly on the lower or upper form, model the nail architecture with gel along it. To create an apex, you can press the gel at 7-12 seconds, depending on the type and power of the lamp. Then send the nail to the lamp until the gel is fully cured: 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove the sticky residue with PREP&FINISH and a lint-free wipe. With a 150/180 nail file, perform step-by-step filing of the shape.

PRO tip: apply gel leaving at least 1mm from the cuticle to avoid material lifting in this area

Brand: ADORE 
Volume: 30 g