ADORE. One Drop Gel, 30 g, #08, Sun kissed. Builder gel, beige with microshimmer

Builder gel in a jar with vacuum pump one Drop Gel #08 - beige with micro shimmer

one Drop Gel is a medium-thick camouflage builder gel for extension, strengthening, and correction of nail architecture for medium and above-medium length.

Used for:
- extension on top and bottom forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Advantages of one Drop Gel:
+ convenient medium-thick consistency
+ cold polymerization
+ natural shades
Main advantage - excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from natural nail to artificial, adapting to the color of the nail plate.
Convenient in use and storage thanks to the vacuum dosing system: one press = one drop. The volume of the drop is adjusted by the force of pressing the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before use, you need to remove the transparent protective silicone cap from the pump !

Application technique:
0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail.
1. Degreasing: mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air dry until a whitish tint appears on the surface of the nail plate
3. Bonding: if using the adhesive base PRO BASE-BOND, skip this step
4. Base layer: apply a priming uniform layer of base coat PRO BASE-BOND, carefully covering the side walls and free edge. Polymerize the base coat in a UV lamp for 2-3 min, in an LED lamp for 60 sec.
5. Strengthening: using a gel brush, apply a rubbing layer of gel over the entire surface of the nail plate with a 1mm gap from the cuticle. On the uncured gel, apply a second leveling layer, considering the basic principles of modeling with hard materials. Polymerize in a UV lamp for 2-4 min, in an LED lamp - 90 sec.
Remove the residual sticky layer using PREP&FINISH and a lint-free wipe. Using a 150/180 grit nail file, perform step-by-step filing of the shape.

PRO tips:
- to facilitate material application, you can use top forms or gel tips
- to prevent peeling from the free edge, we recommend filing the natural nail from the inside by 1-2mm.

Extension: prepare/install forms one by one on each finger. Apply a thin substrate of desired length and shape directly onto the bottom or top form, then model the nail architecture with gel. To create the arch, you can pinch the gel at 7-12 seconds, depending on the type and power of the lamp. Then send the nail to the lamp until full polymerization of the gel for 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove the residual sticky layer using PREP&FINISH and a lint-free wipe. Using a 150/180 grit file, perform step-by-step filing of the shape.

PRO tip: apply gel with a minimum 1mm gap from the cuticle to avoid material peeling in this area

Brand: ADORE 
Volume: 30 g