ADORE. One Drop Gel, 30 g, #09, Milk tea. Builder gel, milky beige

Nail extension gel in a jar with a vacuum pump one Drop Gel #09 - milky beige

one Drop Gel - a medium-density camouflage gel for extension, strengthening, and correction of nail architecture for medium to medium-long nails.

Used for:
- extension on upper and lower forms
- strengthening and correction of nail architecture as a mono product and in combined techniques with harder polymer materials

Advantages of one Drop Gel:
+ convenient medium-dense consistency
+ cold polymerization
+ natural shades
Main advantage - excellent self-leveling.

The gel has medium pigmentation; the natural shade of the gel camouflages the transition from the natural nail to the artificial one, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dosing system: one press = one drop. The drop volume is regulated by the force of pressing the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before first use, remove the transparent protective silicone cap from the pump !

Application technology:
0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail.
1. Degreasing: mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration: apply NAIL FRESHER to the entire nail, allow to air dry until a whitish tint appears on the surface of the nail plate
3. Bonding: when using adhesive base PRO BASE-BOND, skip this step
4. Base layer: apply an even priming layer of base coat PRO BASE-BOND, carefully covering the side walls and free edge. Polymerize the base coat in a UV lamp for 2-3 min, in an LED lamp for 60 sec.
5. Strengthening: using a gel brush, apply a rubbing layer of gel over the entire surface of the nail plate, leaving at least 1mm from the cuticle. On the uncured gel, apply a second leveling layer, considering the basic principles of modeling with hard materials. Polymerize in a UV lamp for 2-4 min, in an LED lamp - 90 sec.
Remove the residual sticky layer using PREP&FINISH and a lint-free wipe. Using a 150/180 grit file, perform a step-by-step filing of the shape.

PRO tips:
- to facilitate material application, you can use upper forms or gel tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2mm.

Extension: prepare / install forms one by one on each finger. Place a thin base of the desired length and shape directly on the lower or upper form, then model the nail architecture with gel. To create an arch, you can press the gel at 7-12 seconds, depending on the type and power of the lamp. Then place the nail in the lamp for complete polymerization of the gel for 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove the residual sticky layer using PREP&FINISH and a lint-free wipe. Using a 150/180 grit file, perform a step-by-step filing of the shape.

PRO tip: apply the gel leaving at least 1mm from the cuticle to avoid material lifting in this area

Brand: ADORE 
Volume: 30 g