HEYLOVE. Smart gel, Hug, 15 ml, liquid builder gel, builder gel for extensions

Application method:

1. Grind the plate with a 180 grit file or a 100 grit buffer.
2. Wipe with a degreaser to remove dust, especially under the cuticle and in the side sinuses.
3. Apply dehydrator phBond and wait 30 seconds for it to evaporate moisture.
4. With rubbing motions, apply a primer layer of rubber base and add a small amount more of base to create a smooth surface. Cure for 30 seconds.
5. Remove the dispersion (sticky) layer from the base after polymerization, especially under the cuticle.
6. Apply Smart gel in an architectural layer. Polymerize for 30 seconds, then place both hands again for 1 min.
7. Remove the sticky layer from Smart gel.
8. Perform surface filing if desired and be sure to file the end to create thickness from the gel.
9. As the last layer, apply a top coat (top). Cure for 1-2 min.
10. Using a carbide bit in the shape of a 'corn', file out the natural nail from below in the free edge area.
11. Carefully sand the end with a buffer so as not to damage the coating surface.
12. Wipe with a damp cloth to remove dust and apply cuticle and hand skin care products. Done!