HEYLOVE. Gum gel, CLEAR, 5 g, gum gel for design

\r\n
• \r\n

  Gum gel - a thick, elastic gel designed for creating 3D designs.

  \r\n

  Video review at the link: https://www.instagram.com/reel/DDeoymGoD2p/?igsh=MTU2enQ4aHRpeGxqMA==
  
  Design example at the link: https://www.instagram.com/reel/DDcDXkCtECX/?igsh=ODMzemJpams0dGVp

  \r\n
\r\n

Design example at the link: https://www.instagram.com/reel/DQ6uNk6CUvc/?igsh=MWM5Zm5pYmsyanR4cQ==

\r\n
• thick consistency;
\r\n
• non-sticky;
\r\n
• remains flexible after curing;
\r\n
• the gel does not run, no need to fix it during use, just place and immediately cure in a lamp for full polymerization;
\r\n
• can be combined (mixed) with dry glitters, pigments, foil flakes, and rub-in powders;
\r\n
• has no sticky layer after curing, so you can immediately apply rub-in powder onto the gel.
  
  \r\n
  \r\nCuring time: 1-2 min
  
  
  \r\n

  Volume: 5 g

  \r\n

  Manufacturer: TM "HEYLOVE"

  \r\n

  Country: Ukraine

  \r\n

  Ingredients (INCI): Acrylates Copolymer, Polyacrylic Acid, Hydroxypropyl Methacrylate, Trimethylbenzoyl Diphenylphosphine Oxide, Pigments. May Contain: Cl 77499, Cl 77891, Cl 15850, Cl 45380, Cl 47005, CI 15510

  \r\n

  Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient to cause the material to polymerize. When painting nail tips, we recommend keeping the working side of the UV lamp facing away from the master. If the lamp is turned on with the light facing the master, unwanted polymerization of the material on brushes and the necks of open bottles may occur.

  \r\n

  Note: all documents are in the attached files!

  \r\ncan be combined with dry glitters, pigments, foil flakes, and rub-in powders;
\r\n