ADORE. Art Gel "Funky Gum", 15 ml. Builder gel for 3D designs in a jar, transparent

Gum gel 15 ml in a jar - transparent

Funky Gum - gum gel for 3D designs with a sticky layer.

Used for 3D designs and sculpting of volumetric elements of any size and shape.

Gum gel retains flexibility after curing, which minimizes trauma when wearing large-volume designs.

We do not recommend applying Funky Gum to the entire nail surface.

Physical and chemical properties:

• consistency - thick
• curing speed - slow
• after curing - flexible
• PH - 6
  
  

Application technology:

0-4 Prepare the nail plate in the standard way: manicure, degreasing, dehydration, bonding. Apply base coat and color if needed.

5. Design:

5.1. Squeeze out a small amount of gum gel and create a 3D element of the desired shape. For application, periodically moisten the tool (or fingers) in an alcohol-containing liquid PREP&FINISH.
5.2. Place the decorative element on the sticky layer of the coating. Cure in UV/ LED lamp for 120/ 60 seconds.
5.3. Remove the sticky layer using PREP&FINISH and a lint-free wipe.

6. Top:

secure the finished design with top coat. For hard-to-reach areas, additionally use a liner brush. Cure in UV lamp for 2-3 minutes, in LED lamp - 1 minute.

Removal:

to remove designs made with Funky Gum, we recommend removing the main volume using nippers, and remove the residue with a drill or by soaking using Gel Remover.

PRO tip:
- for ease of use, we recommend creating 3D elements with hands without gloves
- to increase design variety, you can mix dry pigments, glitters, and other dry decorations into the gum gel

Manufacturer: ADORE

Volume: 15 ml