ADORE. 3D Funky Art Gel, №14, Lemon glass, 15 ml. Gel for volumetric designs, lemon stained glass

Gel for volumetric designs - lemon stained glass

3D Funky Art Gel is a colored gel without a sticky layer for volumetric designs in a tube.

Used for:
- Korean-style designs: transparent flowers, waves, drops
- Sculpting volumetric elements directly from the tube
- Increasing design variability: rub in rubbing powders, pigments, glitter onto cured gel

Advantages of 3D Funky Art Gel:
- Can be used at any stage of coating, including over the top coat
- Does not require covering with a top coat
- Easy to control thickness and volume of material by increasing/decreasing pressure on the tube
- Easily filed off with a drill or nail file

Characteristics:
Consistency: thick.
Curing speed: medium.
After curing: hard.
Viscosity: low.
Pigmentation: high.

How to apply 3D gel?
1. Perform preliminary preparation and apply base/gel/gel polish/color/top coat
2. Design: by pressing the tube, squeeze out the required amount of gel onto the nail. If necessary, use a liner to adjust the design. Cure in a UV/LED lamp for 120/90 seconds.
3. Finish: if color, rubbing powder or other decor was applied over the gel, secure the coating with a top coat. Cure in a UV/LED lamp for at least 1 minute.
WARNING! Before using colored gel, we recommend kneading the tube with your fingers

PRO tip: for extreme volumes, prefer layer-by-layer application and curing of the material. Recommended thickness - up to 3 mm per layer

Manufacturer: ADORE

Volume: 15 ml