Carrinho vazio
Gel polish No.501 – complex gray-green
High-quality gel polish of medium density has a dense rich pigment. Provides neat, even coverage of the nail plate in one or two layers, does not seep into the sinuses, has no strong odor.
Thanks to its fairly thick consistency, the gel polish can be used not only as a standalone color but also for nail art. It has an optimal polymerization speed in UV/LED lamps.
Advantages of ADORE professional gel polish:
- safe 9-free formula
- current palette of carefully selected shades
- 3-stage product testing
Application technology:
0. Prepare the nail plate for gel polish application: perform a manicure, shape the free edge of the nail as needed. If using remover, remove its residue with a damp wipe.
1. Degreasing: mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate.
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air dry until a whitish tint appears on the nail plate surface.
3. Bonding: with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving 1mm from the cuticle and side walls. Let air-dry for 15 seconds.
4. Base coat: apply a base coat in an even layer. Cure in UV lamp for 2-3 minutes, in LED lamp for 60-90 seconds. To level the architecture with base, we recommend using only low-acid bases on a dried underlayer.
1. Degreasing: mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the nail plate.
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air dry until a whitish tint appears on the nail plate surface.
3. Bonding: with a semi-dry brush, apply acid-free primer ULTRABOND to the entire nail, leaving 1mm from the cuticle and side walls. Let air-dry for 15 seconds.
4. Base coat: apply a base coat in an even layer. Cure in UV lamp for 2-3 minutes, in LED lamp for 60-90 seconds. To level the architecture with base, we recommend using only low-acid bases on a dried underlayer.
5. Color: apply GEL POLISH in 1-2 thin layers, avoiding strong pressure on the brush. Cure each layer in UV lamp for 2 minutes, in LED lamp for 60 seconds.
6. Finish coat: seal the coating with top. Cure in UV lamp for 2-3 minutes, in LED lamp for at least 60 seconds. Let the coating cool completely.
To level the architecture with top, we recommend using top coats of medium-thick and thick consistency.
! PRO tip: cover light and bright gel polishes with UV-filter top to preserve shade intensity, and dark and red colors with top without UV filters to prevent shade distortion.
! Strict adherence to gel polish application technology is the key to long-lasting manicure without chips, cracks, or peeling.